Car Polishing Cloth

It is amazing how many people who do not know how to clean or polish and wax their cars. Many people use products that were never intended for their car and others use products and equipment that should only be used by trained professionals. Some never even wax or clean their cars. Then they wonder why their car is given a very low trade in figure at the dealer, or why their paint is dull and flaking.

In this article we interviewed numerous professional automotive designers and professionals like. We asked them what products they used for advice and that consumers could use. They came back with quite the same advice:

Clean the car: It is very important that the use of harsh, non-automotive products can actually harm your cars finish and to be faster. Spray the first car and get wet. Use water to spray the dirt and other contaminants that could scratch your car if you start immediately with a sponge and water first. Also, do not clean your car in the sun on a hot day. Do make sure you use hot water because it works best to loosen contaminates. After getting your car wet, use a solution of washing motor vehicles and add to water in a bucket. Follow the instructions on the bottle. Then, wash the car. You will find it easier if you use a washing brush with a long handle (most auto parts stores have these). Be sure to wash and rinse in sections so that the car wash soap does not dry before being washed. Then using terry cloth towels or chamois, dry off the car. A good tip: use a squeegee. It is much faster and easier.

stubborn contaminants: There will be dirt, bugs, tar, etc. .. who will be left after washing. There are many products that are specially designed for the removal of these items and you paint your car. The resounding answer of the experts was Meguiar's bug and tar cleaner. Remove all contaminants and follow the instructions (some products can remove paint if not used properly). A tip: 3M and other manufacturers make a plastic shield that can be applied on large painting of your car like bumpers and behind the tires to protect from contaminants and rock chips.

Use a cleaner wax: This will remove any stubborn contaminates like ground in bug splatter on your painted bumper, acid rain etching, bird drop spots, and minor scratches. Use a circular motion, like wax. Follow signs for the Polish own particular (some require other wet or damp applicator pad only). Do the car one section at a time and use a section of clean cloth to polish once dry. Most polishes dry cleaner to a white haze. Make sure the compression on all the mists and residual polishing filter. When you have finished car will be really good finish. A good tip: For deeper scratches, contaminants, etc. .. you can use an orbital buffer or polisher to apply the cleaner polish. Be careful and use at low speeds (under 2000) anything above this and you risk burning the paint.

Apply several coats of varnish or wax: There is a big difference between car wax and car polish. Car wax is usually a mixture of carnauba wax and other waxes that give a deep wet look shine and new car. It comes in a liquid and a paste, and it will not last as long as car polish. Car wax is also less effective at high temperatures and can melt on hot areas like the hood. Car polish is a polymer blend usually with no wax. For varnish can last 1 year between coats and a very strong protection for your paint. Experts recommend a car polish with Teflon in it for the protection and durability. The experts love the extra, more shine car wax, but all agreed it was better suited to car shows. Whatever your choice, they are both applied in the same way. Apply in a circular motion and let it dry to a haze. Wipe dry wi.