Moped Seat

I was recently given an old Honda moped Vision rescue. We got it to work by boost. He had a full tank of gasoline initially, but in one week, we ran dry. We know where the tank is, and it is under the seat. We tried to open it but failed. Does anyone know how to open the seat, keyless and without destroying the complealty seat???

I had a melody Honda 15 years ago and it got destroyed by vandals, I am sure the mechanic broke the lock with a screwdriver and after that I just left open.

Otherwise, it's a case of drilling the lock and the replacement, I suppose.

Sorry, no
but I saw some of them to use a cable lock, then putting the bike on its side and making a hook from an old coat hanger and a flashlight, you should be able to guide in place between the body and chassis Go fishing and
gently pulling on the shroud of Bowden cable must release the lock. careful not to hook the wiring loom
Suzuki CS 50 but my lock is lever actuated and the lock is in the metal structure and can not liberate, but careful use of open ended wrench may be used to undo the bolts hinge.

I'm not sure what model, but if you can remove the side panel, without opening the seat, you can have a chance to operate the locking mechanism.

He should be able to open with a screwdriver

if it does not work, you must force it and replace

a screwdriver and a wrench to turn, it is a universal key for most bikes.

You must obtain the same lock and break it with a screwdriver / prybar.